Nonstop Flushing: Solving the Flushometer Toilet Enigma
Easy Fix To a Flushometer
A flushometer is a device found on most commercial toilets. While it works well, it does occasionally get clogged, leading to water continually flowing into a toilet and causing nonstop flushing. When this happens, property owners may grow concerned about toilet overflow or flooding. Thankfully, for manual flushometers, there can be an easy fix to this problem.
1. Shut Off the Water
To avoid overflow or a possible toilet flood, you should first shut off the water to the affected toilet. There should be a flathead screwdriver slot on either the left or right side of your flushometer. Turn the screwdriver to shut off the water supply. On some models, the groove may be hidden under a cover.
2. Remove Flushometer Lid and Flange Cover
Once you have eliminated the worry of toilet overflow by turning off the supply, you can remove the flushometer lid followed by the flange cover. To do this, you will need a wrench. You do not need to remove the top nut, only loosen it. The lid and flange cover should screw off easily. However, be aware that water may spill out when removing the cap.
3. Remove the Gasket and Clean
To stop a toilet from continually flushing, you must resolve the main issue, which is likely a dirty gasket. Once the cover is removed, you will see the gasket, likely with a lot of built-up sediment. Remove the gasket and clean it thoroughly, remembering to clear any debris from the weep hole.
4. Return Elements and Test the Fix
Once everything is clean, replace all the parts and turn the water back on. Hopefully, the cleaning worked, and your toilet stopped flushing. If not, you may want to contact a plumbing specialist in the Tusculum, TN, area to take a look.
A continually running and flushing toilet can lead to toilet overflow, so it is vital to resolve the issue quickly. Try the steps above to clean the gasket, but if that doesn’t work, then shut off the water supply and call in a professional.